dmmt390 6 pnp small signal transistors features x epitaxial planar die construction x ultra-small surface mount package maximum ratings symbol parameter rating unit v ceo collector-emitter voltage - 40 v v cbo collector-base voltage -40 v v ebo emitter-base voltage -5 .0 v i c collector current-continuous (1) - 200 ma p c power dissipation (1) 200 mw r thja thermal resistance 625 o c/w t j junction temperature -55 to +150 o c t stg storage temperature -55 to +150 o c electrical characteristics @ 25 o c unless otherwise specified symbol parameter min max units off characteristics (2) v (br)ceo collector-emitter breakdown voltage (i c = - 1.0madc, i b =0) - 40 --- vdc v (br)cbo collector-base breakdown voltage (i c = - 10uadc, i e =0) -4 0---vdc v (br)ebo collector-emitter breakdown voltage (i e = - 10uadc, i c =0) -5 .0 --- vdc i cex collector-base cutoff current (v ce = - 30vdc, v eb(off) = - 3.0vdc) --- - 50 nadc i bl emitter-base cutoff current (v ce = - 30vdc, v eb(off) = - 3.0vdc) --- - 50 nadc on characteristics (2) h fe dc current gain (i c = - 100uadc, v ce = - 1.0vdc) (i c = - 1.0madc, v ce = - 1.0vdc) (i c = - 10madc, v ce = - 1.0vdc) (i c = - 50madc, v ce = - 1.0vdc) (i c = -1 00madc, v ce = - 1.0vdc) 60 80 100 60 30 --- --- 300 --- --- --- v ce(sat) collector-emitter saturation voltage (i c = - 10madc, i b = - 1.0madc) (i c = - 50madc, i b = - 5.0madc) --- - 0.2 5 - 0. 4 0 vdc v be(sat) base-emitter saturation voltage (i c = - 10madc, i b = - 1.0madc) (i c = - 50madc, i b = - 5.0madc) - 0.65 --- - 0.85 - 0.95 vdc note: 1. valid provided that terminals are kept at ambient temperature.
omp onents 20736 marilla street chatsworth
mcc tm micro commercial components revision: a 2011/01/01 sot-363 j m a c b g h k d l dimensions c 2 e 2 e 1 b 2 b 1 c 1 www. mccsemi .com 1 of 4 mm dim min max min max note a .006 .014 0.15 0.35 b .045 .053 1.15 1.35 c .085 .096 2.15 2.45 d .026 0.65nominal g .047 .055 1.20 1.40 h .071 .087 1.80 2.20 j --- .004 --- 0.10 k .035 .043 0.90 1.10 l .010 .018 0.26 0.46 m .003 .006 0.08 0.15 marking: k3q lead free finish/rohs compliant ("p" suffix designates rohs compliant. see ordering information) epoxy meets ul 94 v-0 flammability rating moisure sensitivity level 1 inches
small signal characteristics c obo output capacitance (v cb = - 5.0vdc, f=1.0mhz, i e =0) --- 4. 5 pf f t current gain-bandwidth product (v ce = - 20vdc, i c = - 10madc, f=100mhz) 250 --- mhz switching characteristics t d delay time --- 35 ns t r rise time v cc = - 3.0vdc, i c = - 10 m adc, vbe(off)= 0.5vdc, i b1 = - 1.0madc --- 35 ........------------ ns t s storage time --- 2 25 ns t f fall time v cc = - 3.0vdc, i c = - 10 m adc, i b1 =i b2 = - 1.0madc --- 75 ns revision: a 2011/01/01 micro commercial components mcc tm dmmt390 6 www. mccsemi .com 2 of 4
revision: a 2011 /01/01 micro commercial components mcc tm dmmt390 6 0.5 0.6 0.7 0.8 0.9 1 . 0 1 10 100 v , base-emitter (v) be(sat) saturation voltage i , collector current (ma) c fig. 5, typical base-emitter saturation volta g e vs. collector current i c i b = 10 0.01 0.1 10 1 1 10 100 1000 v , collector-emitter (v) ce(sat) saturation voltage i , collector current (ma) c fig. 4, typical collector-emitter saturation voltage vs. collector current i c i b = 10 1 10 1000 100 0.1 1 10 1000 100 h , dc current gain fe i , collector current (ma) c fig. 3, typical dc current gain vs collector current t = -25c a t = +25c a t = 125c a v = 1.0v ce 1 100 10 0.1 1 10 100 c , input capacitance (pf) ibo c , output capacitance (pf) obo v , collector-base voltage (v) cb fig. 2, input and output capacitance vs. collector-base volta g e f = 1mhz cibo cobo 0 50 25 50 75 100 125 150 175 200 p , power dissipation (mw) d t , ambient temperature (c) a fig. 1, max power dissipation vs ambient tem p erature 100 150 200 0 www. mccsemi .com 3 of 4
mcc revision: a 2011/01/01 tm micro commercial components www. mccsemi .com 4 of 4 3 ordering information : ***important notice*** micro commercial components corp. reserve s the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . micro commercial components corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . the user of products in such applications shall assume all risks of such use and will agree to hold micro commercial components corp . and all the companies whose products are represented on our website, harmless against all damages. ***life support*** mcc's products are not authorized for use as critical components in life support devices or systems without the express written approval of micro commercial components corporation. ***customer awareness*** counterfeiting of semiconductor parts is a growing problem in the industry. micro commercial components (mcc) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. mcc strongly encourages customers to purchase mcc parts either directly from mcc or from authorized mcc distributors who are listed by country on our web page cited below. products customers buy either from mcc directly or from authorized mcc distributors are genuine parts, have full traceability, meet mcc's quality standards for handling and storage. mcc will not provide any warranty coverage or other assistance for parts bought from unauthorized sources. mcc is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. device packing part number-tp tape&reel;3kpcs/reel
|
